Monday, 15 June 2020

Sketchup LESSON 4: Simple 3D Design Example for 3D Printing

I started by making a 75mm x 25mm rectangle and raising it to 25mm. Next, I pushed the holes 10.25mm in and raised the pegs 10mm, so the pegs have room to fit. To finish I added my name and coloured everything.
I started with a 50mm x 50 mm square I raised 25mm.I pushed the holes 10.25mm in and raised the pegs 10mm, so they can fit. To finish I added my name and coloured everything.

No comments:

Post a Comment